RDG 2000-2500-2500S Ultrasonic digital flaw detectors
The new design RDG 2000-2500-2500S digital flaw detectors are equipped with a high brightness screen for A-scan presentation and an operator interface via dedicated keyboard and video displays set around the special waveforms panel.
With different measurement methods available, special functions, an internal data logger, and complete output ability, the RDG 2000-2500-2500S detectors are the most versatile of the new generation.
The high protection IP67 allows the use in workshop and costruction sites being protected against water and oil.
RDG 2000, 2500 and 2500S can be use DAC or TGC and AVG/DGS curves.
The DAC curves, which can be drawn on 10 points, can be selected on 3 level (-6, -12dB and one custom) with the possibility to read echo height and curve variation.
The AVG/ADA curves, for straight probes (ex. DP25/2, DP25/4 and DP10/4) allow evaluation of the flaw equivalent diameter even when attenuation or transfer losses occur.
The transflective TFT display with adjustable brightness can be viewed even in unfavourable conditions.
“Flip monitor” function allows the automatic screen rotation depending on the handle operator (hand right/left).
The new RDG 2500S ultrasonic flaw detector can automatically interface with the multitransducer rotating probe dedicated to specific control of solid axles for railway field.
Configured to execute, with proper coding, calibration for the transducer selected by rotary switch on the device.
Each calibration panel recalled is identified by a message displayed at the bottom of the Ascan window.
