MG-25 / MG-25-5 / MG-25-10 / MG-25-20 / MG-25-50. Magnetometer Magnetic Field Measurement by Parker-Made in USA-Magnetic Particle Inspection-MPI-Magnetic Yokes-NDT

MG-25 Magnetometer MG-25 Range 20-0-20 Gauss MG-25-5 Range 5-0-5 Gauss MG-25-10 Range 10-0-10 Gauss MG-25-50 Range 50-0-50 Gauss         Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your…

Details

MINEX 4600 UXO Landmine Detector Dual Frequency UXO Unexploded Munitions Institute Dr Foerster

One-piece design with ruggedized hardware Audible and visual induction of targets New ground learn function Underwater capability Special military mode Computer interface     Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product…

Details

MPI Remover Cleaner – UPGRADE

Upgrade to the new product with collectively over 50 years experience in manufacturing Magnetic Particle and Dye Penetrant products to Australian & International standards. Smarter, Better. Smartchem Australian Made & Owned SmartChem  Aerosol MPICA SMARTCHECK MPI CLEANER is a rapid drying solvent cleaner formulated specifically to remove white contrast lacquers used in visible magnetic particle…

Details

MULTICAT 4.850-UXO-FEREX-Multi sensor system with gradient magnetometer-unexploded munitions-institute dr foerster-kks instruments

Your Partner for Landmine and UXO Detection FOERSTER MULTICAT is the high-performance, economical trailer vehicle for large-area detection, localisation, identification and mapping of ferromagnetic historical burdens and UXO (= Unexploded Ordinance). Restoration of contaminated ground areas is increasing continually in importance. Freeing such areas from historical burdens, some of them of military origin in the…

Details

NDT Railways Equipment Gilardoni Catalogue

Bore Axle Ultrasonic Testing Unit New generation ultrasonic system for hollow rail axle inspection with multichannel electronic for high performance and flexibility. Reduced dimensions allow to inspect hollow rail axles up to 2400mm long and bore diameters between 30 – 90mm from one side. Controls are performed by a motorized probe with a maximum of…

Details

Ovens Laboratory Industrial 155 455C ATS Applied Test Systems USA made

Since 1965, Applied Test Systems, Inc. (ATS) has manufactured standard and custom ovens for a wide range of testing , laboratory, and industrial processes. Ovens performing materials testing are designed to mount on testing frames manufactured by ATS, Inc. and other companies. Ovens may be used during any of the following tests: tension, compression, sheer,…

Details

PB1 Powder Blower by Parker-Made in USA-Magnetic Particle Inspection-MPI-Magnetic Yokes-NDT

The Parker Model PB-1 Magnetic Powder Blower provides reliable and controlled application of Magnetic Inspection Powder to areas previously inaccessible; horizontal, vertical and overhead.             Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email…

Details

Penetrant KD Check Karl Deutsch RDP 1 SD 1

Liquid Penetrant Testing is a nondestructive testing (NDT) method, which enables the visualization of surface cracks if the defect is open to the surface. Inhomogenities in the volume cannot be detected. Mainly metals, but also plastics and ceramics can be inspected with liquid penetrant testing. It is recommended to execute a tolerance check on plastics…

Details

Penetrant Test Bench Magnetic Particle Inspection Karl Deutsch 9510.000

The KD-Check Stationary System is designed for liquid penetrant testing of small and medium-sized components. Each step of process like precleaning, penetrant dwell, penetrant removal, developing and evaluation can be done here. It is suitable for both single component and small series testing. A switchbox (mounted on the side panel) provides easy use of lighting,…

Details

Penetrant Test Block no 2 Karl DEutsch 9992.100

The test block no. 2 according to EN ISO 3452-3 is used for regular performance checking of dye penetrants and fluorescent penetrants in opened, partially used containers and stationary testing systems. Description: The test block no. 2 follows the concept of the American test block PSM 5 (Penetrant System Monitor). The test block is a…

Details

Permanent magnet set

Permanent magnet set PM-50 PM-50 contacts are covered with an additional metal surface to reduce damage to the strong surface. PM-50 allows access even in restrictive applications. PM-50 Built with super strong rare earth Neodymium Magnets exceeds AS1171 18kg Lift Test lift test rating.  PM-50 is constructed with the separation cable for width compliance whilst…

Details

PL-8S. PL-10S / PL-8. PL-10 / PL-8S-H. PL-10S-H / PL-8SCE-H. PL-10SCE-H. Magnetic Coils by Parker-Made in USA-Magnetic Yoke-Magnetic Particle Inspection-MPI-Magnetic Yokes-NDT

PORTABLE MAGNETIZING COILS Parker’s new portable magnetizing coils are designed for magnetic particle inspection of ferrous metal parts. The new coils allow for the use of either dry powder or wet fluorescent inspection media and may be used for demagnetizing as well. The coils are molded in a tough black polyurethane material and comes equipped…

Details

Presentation Ardrox NDT Application Presentation surechem chemetal

Fields of Applications: aircraft military transport automotive engineering power plants welding pressure vessel and machine construction castings ships electronics   Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message

Details

Presentation Karl Deutsch Automated Ultrasonic Weld Test Pipe Inspection

Nondestructive Material Testing: • Ultrasonics • Magnetic Particles • Penetrant Testing • Wall & Coating Thickness • Crack Depth Measurement     Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your…

Details

Presentation Karl Deutsch Leptoskop

• Smallest Coating Thickness Gauge Available (48x94x17mm) • Light-Weight (70 g), ≈ 100 hours battery life (size AAA) • Large Graphical Display (128 x 64 pixel, 26 x 16 mm) • Large Display of Measured Values, Easy to Read • „Quasi-Analogue“ Measurement Display • Display Contents Can be Flipped • Grafical Representation of Statistics (Unique…

Details

Presentation Karl Deutsch Magnetic Unspection Deutro Fluxa

Nondestructive Material Testing: • Ultrasonics • Magnetic Particles • Penetrant Testing • Wall & Coating Thickness • Crack Depth Measurement       Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject…

Details

Presentation Karl Deutsch Test Methods

Nondestructive Material Testing: Ultrasonics Magnetic Particles Penetrant Testing Wall & Coating Thickness Crack Depth Measurement   Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message

Details

Presentation Karl Deutsch Ultrasonic Pipe Testing

Presentation Karl Deutsch – ECHOGRAPH Automated Ultrasonic Tube Inspection systems       Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message Brochure Enquiry Form Name (required) Company Name(required) Email (required) Phone Number(required) Country (required) Product Subject Your Message

Details

Presentation Phased Array Ultrasonic Testing of Heavy Wall Seamless Tubes Karl Deutsch Echograph

An ultrasonic testing portal for heavy-wall seamless tubes within a diameter range from 178 – 419 mm, a wall thickness range from 20 – 100 mm and a tube length from 4 – 15 m is presented in this article. During the inspection, the tube is scanned with helical testing traces. While the tube is…

Details

Pressure Aging Vessel ATS Applied Test Systems USA made

The recently improved Pressure Aging Vessel (PAV) from ATS has been designed to simulate in-service oxidative aging of asphalt binder according to procedures developed by the Strategic Highway Research Program (SHRP). The new PAV system is fully compliant with the most recent ASTM and AASHTO standards for these tests. (Refer to ASTM designation D6521-00 and…

Details